Click image to view full size image
D116 ULTRASONIC FLOW METERS
Widely used Transit-time technology based flowmeter.
Introduction
D116 Series Ultrasonic Flowmeter is a state-of-the-art universal transit-time flowmeter designed using FPGA chip and low-voltage broadband pulse transmission.
The flowmeter has wide range of applicability, with user-friendly interface which is easy to handle. The clamp-on transducers allow users to measure flow data without any pipe damage, and there is no pressure drop, no leaks, no corrosion of the fluids.
Main Features
Accuracy 1.0% |
Wide flow range 0.01 to 5m/s |
Easy Installation, no pipe cutting |
Wide pipe range 25 to 1200mm |
Bi-direction flow measurement |
User-friendly menu |
For water & clean liquid |
Fit to commonly used pipe materials |
Applications
Water supply, Water treatment, Irrigation, Boiler, Power plant, etc.
Specifications
PERFORMANCE SPECIFICATIONS | |
Flow range |
±0.03ft/s ~ ±16ft/s (±0.01m/s ~ ±5m/s) |
Accuracy |
±1.0% of measured value |
Pipe size |
Clamp-on:1"~48"(25mm~1200mm) |
Fluid |
Water. |
Pipe material |
Carbon steel, stainless steel, PVC, etc |
FUNCTION SPECIFICATIONS | |
Outputs |
OCT Pulse output:0~5000Hz. |
| Analog output:4~20mA,max load 750Ω. | |
Communication interface |
RS485 MODBUS |
Power supply |
10~36VDC/1A |
Keypad |
16(4×4)key with tactile action |
Display |
20×2 lattice alphanumeric, back lit LCD. |
Temperature |
Transmitter:14℉~122℉(-10℃~50℃) |
| Transducer:32℉~176℉(0℃~80℃) | |
Humidity |
Up to 99% RH, non-condensing |
PHYSICAL SPECIFICATIONS | |
Transmitter |
PC/ABS, IP65. |
Transducer |
Encapsulated design, IP68. |
Transducer cable |
Standard cable length: 30ft (9m). |
Weight |
Transmitter: approximately 1.0kg; |
| Transducer: approximately 0.4kg | |
Interface and Size
http://www.pflowmeters.com/